How to Clean a Coffee Machine

Home › Guides › How to Clean a Coffee Machine

To clean a coffee machine, descale it on the schedule in the manual, wash every removable part with warm soapy water, and run fresh water through it afterwards. Use the descaler your maker recommends: most makers rule out vinegar, and Philips says vinegar voids the warranty. Descale a drip machine every 1 to 3 months, a bean-to-cup machine when it prompts you or about every 3 months, and a Nespresso machine every 3 to 4 months or 300 capsules, whichever comes first. The whole job takes about 30 minutes for a bean-to-cup machine, plus rinsing, and it is the single best thing you can do for the taste: a scaled machine brews slower, cooler and weaker, while a clean one brews the way it did on day one.

How often should you clean a coffee machine?

Think in three rhythms: daily, weekly and descaling. Rinse the carafe, the filter basket and the drip tray every day, and wipe the steam wand after every use. Wash the removable parts with warm soapy water once a week, and clean the group head and portafilter on an espresso machine at the same time. Descale on the schedule in the manual, and sooner if you live in a hard-water area: a drip machine every 1 to 3 months, a bean-to-cup machine when the light or screen prompts you, and a Nespresso machine every 3 to 4 months or 300 capsules. Skipping descaling can void the warranty on some machines, so the prompt on the screen is a deadline, not a suggestion. If your water is hard, check the hardness figure from your water supplier and set the machine to the right hardness level, since the machine works out its own descaling reminders from that setting.

How to clean a drip coffee maker

Work through these steps in order, and set aside about 90 minutes, most of which you can walk away from. This method works for most standard drip machines whose manual allows vinegar: if the manual says no vinegar, use the citric acid or shop descaler method below instead.

  1. Empty and rinse. Throw out old grounds and filters, rinse the carafe and the basket, and make sure the reservoir is empty. Take out any integrated water filter first: the acid damages the filter media and can push charcoal granules into the brew path.
  2. Mix the solution. Fill the reservoir with equal parts white vinegar and water, or one part vinegar to three parts water for a light, regular clean. For a 12-cup reservoir, equal parts means 6 cups of each.
  3. Brew halfway and pause. Start a brew cycle, switch the machine off halfway through, and leave the solution sitting in the machine for 20 to 30 minutes so the acid has time to work on the scale.
  4. Finish the cycle. Switch the machine back on and let the rest of the solution run through, then throw the liquid away.
  5. Rinse with fresh water. Fill the reservoir with clean water and brew a full cycle. Let the machine cool for a few minutes between cycles, and repeat 2 to 3 times until you cannot smell any vinegar.
  6. Wash the parts. Scrub the carafe spout and the filter basket corners with a soft brush and dish soap: those corners hold old oils that vinegar will not touch, and stale oil is what makes coffee taste bitter.

Some drip makers give their own recipe in the manual, and the manual wins over any general guide. The Cuisinart DCC-1200 booklet calls for a 1:3 vinegar-to-water solution run through two full cycles, while Keurig specifies its own descaling solution followed by three 12-ounce rinse brews. If your manual names a product, use that product.

How to descale a bean-to-cup machine

Use the machine’s own descaling programme if it has one, and do not stop it once it has started. De’Longhi and Philips both give about 30 minutes for their bean-to-cup machines. Start by taking out the water filter, then fill the tank with water and the descaler at the ratio on the label, or the maker’s own descaler: De’Longhi recommends its EcoDecalk, and Philips specifies its CA6700. Start the programme and follow the prompts on the screen: the machine runs the solution through in stages, pausing so the acid can work, and then asks for fresh water to rinse. Rinse thoroughly, refit the filter, and brew one cup to throw away before you drink from it. De’Longhi warns that an unsuitable product or incorrect descaling may cause faults its guarantee does not cover, and Philips says acids including vinegar damage the machine and void the warranty, so the few pounds saved on a home remedy are not worth the risk while the machine is under guarantee.

How to clean a pod or capsule machine

Pod machines descale the same way, but the schedule and the product are stricter. Nespresso says to descale every 3 to 4 months or 300 capsules, whichever comes first, and its UK FAQ says 2 to 4 months depending on the machine, or when the machine alerts you. Use Nespresso’s own descaler: it advises against vinegar, citric acid and baking powder. Run the descaling programme, then rinse with fresh water until the tank is empty, and wipe the capsule container and drip tray. For a Keurig, use 10 ounces of Keurig Descaling Solution followed by three 12-ounce rinse brews. Empty the used-capsule container and the drip tray every day, since old capsules grow mould fast in a warm, damp machine.

Can I use vinegar to descale a coffee machine?

Not if you want to stay within the maker’s advice. Philips, Jura and Nespresso rule it out, and Philips says it voids the warranty. Jura says to use only its own tablets, and its manual says vinegar may damage the machine or leave residue. De’Longhi says to use only its own descaler and warns that an unsuitable product may cause faults the guarantee does not cover. Moccamaster says vinegar can leave a smell and taste. The reason is the acid itself: acetic acid can make rubber seals and O-rings brittle over time, its smell is hard to rinse out of the system, and it works slowly on heavy scale. The exception is a plain drip machine whose manual allows it: Cuisinart explicitly allows a 1:3 vinegar-to-water mix for its drip makers. Whatever the manual says wins over any general guide, including this one.

Citric acid or a shop descaler?

Citric acid is what many commercial descalers are based on, and it has almost no smell, which is why people prefer it to vinegar. Dissolve about 1 tablespoon of citric acid powder in roughly 1 litre of cold water, or follow the amount on the package, pour it into the reservoir, brew halfway, pause for 20 to 30 minutes, finish the cycle, then run 2 to 3 cycles of fresh water. The key detail is the water temperature: dissolve it in cold or lukewarm water, never hot, since hot citric acid can combine with limescale to form calcium citrate, a residue that settles in pipes and valves instead of flushing out. Never run citric acid through a steam wand or a programme that heats it to steam temperature unless the maker says so. Makers disagree on citric acid too: Nespresso says no, while Fellow prefers it for kettles, so go by your manual. A shop descaler is the easiest option and the one many makers recommend: most use lactic, citric or sulfamic acid with additives that protect metal and help it rinse, and they work faster on heavy scale than vinegar. Follow the label exactly, since concentrations vary, and some go in undiluted while others need mixing.

How to clean the parts descaling cannot reach

Descaling removes mineral buildup inside the water path. Cleaning removes coffee oils from the parts you can touch, and your machine needs both. On an espresso machine, backflush the group head with a dedicated detergent such as Cafiza: drip machine descaler can ruin boiler seals, so do not swap the two. Scrub the portafilter and baskets, and soak them if the oils have gone dark and sticky. Purge the steam wand after every use and wipe it while it is still warm, since dried milk bakes on fast. Wash the carafe, the filter basket, the drip tray and the used-grounds container with warm soapy water every week, and scrub the carafe spout and the basket corners with a soft brush, since those are the spots most guides skip and where rancid oil collects. If the coffee tastes bitter or stale even after a descale, the oils are the likely cause, not the scale.

What happens if you never descale?

Limescale slows the flow, lowers the brewing temperature and can block a machine outright. A scaled machine takes longer to brew, makes weaker coffee, and works harder to push water through narrowing pipes, which wears the pump out early. In hard-water areas the buildup shows up in weeks rather than months, and by the time the machine sounds strained the scale is already thick. Stale coffee oils go rancid and turn the taste bitter, and a damp, warm machine grows mould in the capsule container, the drip tray and the water tank if they are left unwashed. Skipping descaling can also void the warranty, as Philips states plainly. The fix is cheap and quick next to a repair: a descale every few months and a weekly wash keep the machine brewing at full temperature and full strength.

For the rest of the kitchen, see our guides on how to clean a washing machine and how to descale a kettle, and our coffee machine cost calculator for what the machine adds to the electricity bill.

Frequently asked questions

Can I use vinegar to descale my coffee machine?

Not if you want to stay within the maker’s advice. Philips, Jura and Nespresso rule it out, and Philips says it voids the warranty. The exception is a plain drip machine whose manual allows it: Cuisinart explicitly allows a 1:3 vinegar-to-water mix for its drip makers.

How often should I descale a coffee machine?

Nespresso says every 3 to 4 months or 300 capsules, whichever comes first. Bean-to-cup machines descale when they prompt you, about every 3 months. Drip machines need it every 1 to 3 months, and monthly in hard-water areas.

Can I descale a coffee machine with citric acid?

Yes, if the maker allows it. Dissolve about 1 tablespoon in roughly 1 litre of cold water, never hot, since hot citric acid can form a residue that settles in pipes. Rinse thoroughly afterwards. Nespresso advises against it.

Is descaling the same as cleaning?

No. Descaling removes mineral buildup inside the water path. Cleaning removes coffee oils from the group head, portafilter, carafe and baskets with a backflush detergent or soapy water. Your machine needs both.

Sources

The descaling programme guidance, the 30 minute figure for De’Longhi and Philips bean-to-cup machines, the Philips CA6700 specification, the point that Philips says vinegar voids the warranty, the Nespresso schedule of every 3 to 4 months or 300 capsules, the Jura rule to use only its own tablets, and the De’Longhi EcoDecalk recommendation follow a November 2026 coffee machine descaling guide checked against manufacturers and UK retailers. The Keurig figure of 10 ounces of descaling solution followed by three 12-ounce rinse brews, the Cuisinart 1:3 vinegar-to-water mix run through two cycles, and the point to remove integrated water filters before descaling follow a 2026 coffee maker cleaning guide. The citric acid guidance to dissolve it in cold water, the calcium citrate residue risk from hot citric acid, and the warning never to mix descalers with chlorine-based cleaners follow a 2026 descaling guide. The citric acid dose of about 1 tablespoon per litre, the half-cycle pause of 20 to 30 minutes, and the 2 to 3 fresh-water rinse cycles follow a 2026 coffee maker cleaning guide. The backflush detergent guidance for espresso machines, the point that drip descaler can ruin boiler seals, and the November 2026 publication date follow an espresso descaling guide.

Changelog

  • 17 November 2026: guide published.

Leave a Comment