Roof area to roofing squares and shingle bundles, with a waste allowance for cuts at hips, valleys and edges.
A 1,000 square foot roof is 10 roofing squares, and at 3 bundles per square it needs 30 bundles before waste. With a 10 percent waste allowance that becomes 33 bundles to order. If you want the number for your own roof, the calculator above gives it from your roof area, shingle type and waste allowance.
How many shingles do I need?
Roofers measure roofs in squares, where one square is 100 square feet of roof surface. Standard three-tab and architectural asphalt shingles are packaged so that 3 bundles cover one square, which means each bundle covers about 33.3 square feet. The count is therefore roof area divided by 100, multiplied by 3, then increased by a waste allowance and rounded up to a whole bundle, since suppliers sell full bundles only.
How many bundles of shingles for 90 square feet?
For 90 square feet at 3 bundles per square: 90 divided by 100 is 0.9 squares, times 3 is 2.7 bundles, and with a 10 percent waste allowance that is 2.97 bundles, rounded up to 3 bundles to order. Small areas like a porch or shed roof still need the waste allowance, because cuts at the edges use proportionally more material.
What waste percentage should I use?
Use 10 percent for a simple gable roof with few cuts. Use 15 percent for a roof with hips, valleys, dormers or a steep pitch, where more shingles get trimmed to fit. Published roofing guidance puts the usual range at 10 to 15 percent, rising toward 20 percent for very complex roofs. This calculator offers 10 and 15 percent; if your roof is highly cut up, order a few extra bundles beyond the result for future repairs.
How many bundles for common roof sizes?
| Roof area | Squares | Bundles at 3 per square, 10% waste |
|---|---|---|
| 500 sq ft | 5.0 | 17 bundles |
| 1,000 sq ft | 10.0 | 33 bundles |
| 1,500 sq ft | 15.0 | 50 bundles |
| 2,000 sq ft | 20.0 | 66 bundles |
Check the table against the calculator: 1,500 square feet gives 15 squares, 45 bundles before waste, and 49.5 bundles with 10 percent waste, rounded up to 50 bundles.
Do designer shingles change the count?
Yes. Heavier designer and luxury shingle lines are packed with fewer shingles per bundle, so they often take 4 bundles per square instead of 3, covering about 25 square feet per bundle. A 1,000 square foot roof in a designer line needs 40 bundles before waste and 44 bundles with 10 percent waste, against 33 bundles for a standard line. Always check the coverage printed on the packaging of the exact product you are buying, since it varies by manufacturer and line.
What this calculator does not cover
This calculator counts field shingles only. It does not count starter strip, ridge cap shingles, underlayment, flashing or vents, which are ordered separately. It also uses the roof surface area, not the building footprint: if you only know the footprint, measure each roof slope or ask your roofer for the surface area, since a pitched roof is larger than the floor below it. This tool is a separate quantity estimate and does not replace the site’s roofing cost calculator, which prices a full roof replacement.
Frequently asked questions
How many shingles do I need for a 1,000 square foot roof?
33 bundles of standard shingles with a 10 percent waste allowance: 1,000 square feet is 10 squares, times 3 bundles per square is 30 bundles, plus 10 percent is 33 bundles.
How many bundles of shingles are in a square?
Three bundles for standard three-tab and architectural asphalt shingles, since one square is 100 square feet and each bundle covers about 33.3 square feet. Heavier designer lines often take 4 bundles per square.
How many bundles of shingles for 90 square feet?
3 bundles with a 10 percent waste allowance: 90 square feet is 0.9 squares, times 3 is 2.7 bundles, plus 10 percent is 2.97 bundles, rounded up to 3 bundles.
What waste factor should I add for shingles?
10 percent for a simple gable roof and 15 percent for a roof with hips, valleys, dormers or a steep pitch. Very complex roofs can need up to 20 percent, so add a few extra bundles in that case.
Sources
One roofing square equals 100 square feet, standard shingles take 3 bundles per square at about 33.3 square feet per bundle, and the usual waste allowance is 10 to 15 percent. These figures follow published roofing supplier and contractor guidance, which agrees on the 3-bundle standard and the 10 percent allowance for simple roofs, with designer lines at 4 bundles per square.
Changelog
- 5 November 2026: calculator published.
Cite this page
APA: Wolveyes. (2026, November 5). Shingle Calculator. Wolveyes. https://wolveyes.pk/calculators/shingle-calculator/
MLA: “Shingle Calculator.” Wolveyes, 5 Nov. 2026, https://wolveyes.pk/calculators/shingle-calculator/
<iframe src="https://wolveyes.pk/calculators/shingle-calculator/" width="100%" height="600" style="border:1px solid #E5E0D5;border-radius:8px;" title="Shingle Calculator by Wolveyes"></iframe>
<p><a href="https://wolveyes.pk/calculators/shingle-calculator/">Shingle Calculator by Wolveyes</a></p>