To thaw a frozen pipe, open the faucet the pipe feeds, find the frozen section, then warm the pipe gently with a hair dryer, an electric heating pad or towels soaked in hot water, working from the faucet back towards the blockage until full water pressure returns. It usually takes 30 to 60 minutes. Never use a blowtorch, a kerosene or propane heater, a charcoal stove or any other open flame. If water gushes out while you warm the pipe, shut off the water at once: the pipe has burst.
How do I know a pipe is frozen?
If you turn on a faucet and only a trickle comes out, or nothing comes out at all, suspect a frozen pipe. Check every faucet in the house, hot and cold, to find out whether one line is frozen or the whole house has no water. The likely places for a frozen pipe are against an exterior wall, where the water service enters the home through the foundation, in an unheated crawl space, in a garage or in a cabinet on an outside wall.
Follow the cold line and look for frost on the pipe, a slight bulge or the coldest stretch of pipe. A damp rag run along an exposed pipe shows frost where the ice plug sits. A bulge or a split means the pipe may already have burst, so do not thaw it: turn off the water and call a plumber.
How to thaw a frozen pipe step by step
Find your main water shut-off before you begin, so you can turn the water off fast if the pipe turns out to be cracked. Then follow these steps, which follow the American Red Cross procedure.
- Open the faucet the frozen pipe feeds. Turn on both the hot and cold handles of the fixture the line serves, so melting ice and rising pressure have somewhere to go. The trickle from the tap is your progress meter: the flow grows as the ice clears.
- Locate the frozen section. Look for frost, a bulge or the coldest stretch along an exterior wall or in an unheated space. Heating the wrong section wastes time while pressure keeps building behind the ice.
- Start heating near the faucet, then work towards the blockage. Warm the pipe at the end closest to the open faucet and move slowly towards the frozen part, so melt water has a path out.
- Use a safe, steady heat source. Play a hair dryer along the pipe, wrap it with an electric heating pad, set a portable space heater a safe distance away, or bind it in towels soaked in hot water and rewrap them as each cloth cools.
- Keep applying heat until full water pressure returns. Do not rush it: a full thaw usually takes 30 to 60 minutes. Keep the faucet open the whole time.
- Check every other fixture in the house. A second frozen pipe often hides behind the first, so run every faucet, hot and cold, before you call the job done.
- Protect the pipe so it does not freeze again. Wrap it in foam pipe insulation or approved heat tape once it has thawed, and leave the faucet at a trickle until the cold snap has ended.
Which heat source is safe on your pipe?
Gentle electric heat is safe on every pipe material, but plastic pipe tolerates far less heat than copper, so the safe heat source depends on the pipe. The limits come from the plastics industry: CPVC, PEX and PE-RT pipe may be heated to 180 degrees Fahrenheit, and other plastic piping should be limited to 150 degrees Fahrenheit. Never use boiling water on a plastic pipe.
| Heat source | Copper or steel | PEX, CPVC or PE-RT | PVC and other plastics |
|---|---|---|---|
| Hot water soaked towels | Yes | Yes | Yes |
| Hair dryer or electric heating pad | Yes | Yes, pipe under 180°F | Yes, pipe under 150°F |
| Portable electric space heater | Yes | Yes | Yes |
| Electric thawing machine | Yes, a plumber’s tool | No | No |
| Blowtorch, kerosene or propane heater, charcoal stove | No | No | No |
Keep a portable space heater at least three feet from anything flammable and plugged into a wall outlet, not an extension lead. Keep hair dryers, heating pads and their cords well away from any standing water, to prevent electric shock. An electric thawing machine, the welder-style tool a plumber uses, works only on metal pipe and will not work with plastic pipe.
What if the pipe has burst?
If water starts to gush out of the pipe while you are warming it, unplug the hair dryer, close the nearest water shut-off valve at once and keep the faucet open. Call a plumber to fix the burst pipe. If multiple faucets have no flow, or you suspect a burst pipe anywhere, turn off the main water supply at once and call a plumber. If the frozen section sits behind a finished wall or under a slab, or you cannot reach it to warm it, shut off the water to that pipe, keep the faucet open and call a plumber. If the frozen line is a gas pipe, or you smell gas at any point, stop and contact your gas utility before doing anything else.
How to stop it freezing again
Thawing fixes today, but the pipe will freeze again on the next cold night unless you protect it. The full prevention steps are in our guide to preventing pipes from freezing in winter: insulate exposed pipe, seal the draughts that let cold air onto it, open cabinet doors so warm air reaches pipes on outside walls, and let a faucet drip during a cold snap. A pipe that has frozen once is the one to protect first, because the same cold spot will freeze it again.
For the other winter plumbing jobs, see our guide to protecting outdoor taps from frost and our guide to winterizing a house.
Frequently asked questions
How long does it take to thaw a frozen pipe?
Usually 30 to 60 minutes of steady, gentle heat. The time depends on how long the frozen section is, how cold the pipe is and how much heat you can apply. Work from the faucet back towards the blockage and keep the faucet open: the trickle from the tap grows as the ice clears, and full water pressure tells you the thaw is done.
Can I use a hair dryer to thaw a frozen pipe?
Yes, a hair dryer is one of the safest ways to thaw a pipe. Play it along the pipe, starting at the faucet and working back towards the frozen section, until full water pressure returns. Keep the dryer and its cord away from any standing water. Never use a blowtorch, a kerosene or propane heater or a charcoal stove, which are fire and burst risks.
Should I turn off the water before thawing a frozen pipe?
If only one pipe is frozen and you can see it and it is intact, leave the water on and open the faucet, because running water through the pipe helps melt the ice. If multiple faucets have no flow, if the pipe sits inside a wall or ceiling, or if it shows a bulge or a split, close the main water supply first, open the faucets and call a plumber.
Can a frozen pipe burst while I thaw it?
Yes. Water expands as it freezes, and the pressure behind the ice plug can split the pipe. A bulge or frost on the pipe is a warning sign. If water gushes out while you warm the pipe, unplug the heat source, close the nearest shut-off valve at once, keep the faucet open and call a plumber.
Sources
The steps of keeping the faucet open, applying heat with a heating pad, hair dryer, space heater or hot towels, never using a blowtorch, kerosene or propane heater, charcoal stove or other open flame device, and calling a licensed plumber if the frozen area cannot be reached follow the American Red Cross guide to preventing and thawing frozen pipes. The 30 to 60 minute thaw time, the tools and materials list, the safety checklist and the step of heating from the faucet towards the blockage follow a plumber guide updated in July 2026. The plastic pipe limits of 180 degrees Fahrenheit for CPVC, PEX and PE-RT and 150 degrees Fahrenheit for other plastic piping, the rule to heat from the faucet side back towards the ice, and the RIDGID thawing machine guidance follow a November 2026 guide to thawing frozen pipes by pipe type and location. The steps of checking all faucets, turning off the main water if the whole house has no flow, and reducing the faucet to a trickle until the cold snap has ended follow a guide updated 10 November 2026. The damp rag test for finding the ice plug and the steps for thawing outdoor pipes follow a This Old House guide.
Changelog
- 22 November 2026: guide published.