How to Clean a Washing Machine

Home › Guides › How to Clean a Washing Machine

Cleaning a washing machine means running an empty hot wash with white vinegar, then cleaning the parts the wash cannot reach: the detergent drawer, the drain filter and the rubber door seal. The whole job takes about two hours, most of it while the machine runs itself, and it needs nothing more than white vinegar, baking soda, a cloth and an old toothbrush. Do it once a month and the machine stops smelling, the clothes come out fresh, and the pump and seals last longer.

How do you know your washing machine needs cleaning?

A musty smell from the drum is the first sign, followed by clothes that smell stale straight out of the wash. Black spots or a slimy film on the rubber door seal mean mould has taken hold, and grey residue in the detergent drawer means detergent and softener have built up where the water cannot flush them away. A machine that drains slowly or leaves water in the drum usually has a blocked filter. Any one of these signs means it is time for a clean, even if the drum itself still looks bright.

What you need

  • White vinegar, about 2 cups, for the hot wash and for wiping the seal.
  • Baking soda, about half a cup, for a second hot wash and for stubborn spots on the seal.
  • A cloth and an old toothbrush, for the seal, the drawer and the filter housing.
  • A towel and a shallow tray, to catch the water when you open the filter.
  • Rubber gloves, if the filter looks dirty.

Read the manual first. Filter locations, drawer removal and bleach warnings differ by manufacturer, and the manual is the authority for your model. If the manual says not to use vinegar or bleach on your machine, follow the manual and use a washing machine cleaner made for the job instead.

How to clean a washing machine step by step

  1. Clean the detergent drawer first. Pull it out, pressing the release catch if it has one, and soak it in hot water with a splash of white vinegar for about 30 minutes. Scrub away the detergent and softener residue with a cloth or a toothbrush, rinse it, dry it and slide it back in.
  2. Clear the drain filter. On most front-loaders it sits behind a small panel at the bottom front of the machine. Put a towel and a shallow tray underneath, then unscrew the filter cap slowly and let the trapped water drain out. Pull out any lint, coins, hair ties and tissue, rinse the filter under warm water and screw it back in. On top-loaders the filter is often inside the fabric softener dispenser, so check the manual for its location.
  3. Wipe the rubber door seal. Pull the seal gently forward and wipe inside the folds with a cloth dampened in white vinegar, using the toothbrush for mould spots and trapped lint. For stubborn marks, make a paste of baking soda and a little water, spread it on the spot, leave it for ten minutes and wipe it off.
  4. Run an empty hot wash with vinegar. Pour about 2 cups of white vinegar into the drum or the detergent drawer and run the machine empty on its longest, hottest cycle, around 60°C or above. The hot water and vinegar dissolve soap scum and limescale and kill the bacteria behind the smell.
  5. Run a second empty hot wash with baking soda. Sprinkle half a cup of baking soda directly into the empty drum and run another hot cycle. This lifts what the vinegar loosened and leaves the drum smelling fresh.
  6. Wipe down and dry. Wipe the drum, the door glass and the seal with a clean cloth, then leave the door open for a few hours so the drum dries fully. A dry drum cannot grow mould.

Leave the door open between washes from now on. A closed door traps damp air inside the drum, and damp is what lets mould grow on the seal. Wipe the seal dry after each wash as well: it takes seconds and stops most mould before it starts.

How often should you clean a washing machine?

Run the empty hot wash with vinegar once a month. That is the maintenance cycle most UK guides recommend, and it keeps soap scum and smells from building up. Wipe the door seal after every wash and check the detergent drawer whenever you see residue. Clear the filter every few months, or sooner if the machine drains slowly. A household that washes mostly on cold, quick cycles needs the monthly hot wash the most, since cold water leaves more detergent residue behind than hot water does.

What not to do when cleaning a washing machine

Never mix bleach and vinegar inside the machine or in any container: together they release toxic chlorine gas. If you use bleach for a deep clean, run a full cycle with bleach only, let it drain completely, and only then run a separate vinegar cycle. Check the manual before using bleach at all, since some drums and seals do not tolerate it. Do not use strong vinegar on rubber seals made from Buna-N or polyacrylate, since it can weaken them: a diluted wipe is enough for the seal. Do not overload the machine with cleaning products either: more vinegar or baking soda does not clean better, it just leaves residue behind.

How much does the cleaning cycle cost?

The cost is one empty hot wash a month, which is a small price for a machine that drains properly and clothes that smell fresh. Work it out for your own machine with our Washing Machine Cost Calculator: enter the kWh per 100 cycles from your energy label and the Ofgem rate of 26.32p per kWh. A neglected machine costs far more in the long run, since a blocked filter strains the pump and a mouldy seal is a repair or a replacement.

Frequently asked questions

Can I use vinegar to clean my washing machine?

Yes. Pour about 2 cups of white vinegar into the drum or the detergent drawer and run the machine empty on its longest, hottest cycle, around 60°C or above. The vinegar dissolves soap scum and limescale and removes smells.

How often should I clean my washing machine?

Run an empty hot wash with vinegar once a month. Wipe the door seal after every wash, check the detergent drawer whenever you see residue, and clear the drain filter every few months.

Why does my washing machine smell?

Detergent residue, mould on the rubber door seal and a blocked drain filter are the usual causes. A monthly hot wash with vinegar, a wiped seal and a cleared filter fix all three.

Can I use bleach to clean my washing machine?

Only if the manual allows it. Never mix bleach and vinegar, since together they release toxic chlorine gas. If you use bleach, run a full cycle with bleach only, let it drain completely, and only then run a separate vinegar cycle.

Sources

The step-by-step method, the 60°C maintenance wash once a month, the 30-minute drawer soak and the filter location at the bottom front follow published UK washing machine cleaning guides from Ideal Home, Airtasker UK and Domestic Wizard. The warning never to mix bleach and vinegar follows the same guides. The 26.32p per kWh rate is the Ofgem Great Britain average Direct Debit electricity rate under the price cap for 1 October to 31 December 2026.

Changelog

  • 9 November 2026: guide published.

Leave a Comment