Wall length and height to a concrete block count and mortar bags, for standard 8 × 8 × 16 blocks and three other sizes.
A 10 ft by 8 ft wall in standard 8 × 8 × 16 in blocks needs 90 blocks before waste, and 99 to order once 10% waste is included, plus 8 bags of 80 lb mortar mix. The method is short: net wall area times blocks per square foot for your block size, plus a waste allowance for cuts and breakages. If you want the count for your own wall, the calculator above does it in one step. For bricks instead of blocks, use the Brick Calculator.
How the block count works
Start with the wall area: length times height, minus the area of doors and windows. Then multiply by the blocks per square foot for the block you are laying. That rate comes from the face of one block plus its mortar joint. Blocks are sold by nominal size: a standard block is called 8 × 8 × 16 in but actually measures 7-5/8 in each way, and the standard 3/8 in joint brings the laid module to exactly 8 × 16 in, a face of 128 sq in. A square foot holds 144 sq in, so the rate is 144 ÷ 128 = 1.125 blocks per square foot. Leaving the joint out is the most common reason a block count comes up wrong.
The formula is: blocks = (length × height − openings) × blocks per square foot × (1 + waste ÷ 100). The calculator rounds the final count up, so a part block is never ordered as a fraction. Mortar is worked out from the block count, at the bag maker’s published rate of blocks per bag.
Blocks per square foot by block size
Find your block in the left column and read across. Only the face size matters for the count: the 4 in and 12 in blocks share the standard 8 × 16 in face, so they lay at the same rate and differ only in wall thickness. The half block has half the face, so a wall takes twice as many.
| Block size (nominal) | Face size with joint | Blocks per sq ft | Mortar bags (80 lb) per 100 blocks |
|---|---|---|---|
| Standard 8 × 8 × 16 in | 16 × 8 in | 1.125 | About 8 |
| Half 8 × 8 × 8 in | 8 × 8 in | 2.25 | About 4 |
| 4 × 8 × 16 in | 16 × 8 in | 1.125 | About 8 |
| 12 × 8 × 16 in | 16 × 8 in | 1.125 | About 8 |
Worked example: a 10 ft by 8 ft wall
Take a garden or garage wall, 10 ft long and 8 ft high, in standard blocks with no openings. Wall area is 10 × 8 = 80 sq ft. Blocks before waste are 80 × 1.125 = 90 blocks. With 10% waste, the order is 90 × 1.10 = 99 blocks. Mortar is 99 ÷ 13 = 7.6, rounded up to 8 bags of 80 lb mix. The wall is 12 courses high: 8 ft is 96 in, and each course is one 8 in module. A bigger wall works the same way: 20 ft by 8 ft with a standard door opening of 21 sq ft deducted needs 173 blocks and 14 bags.
Waste, mortar and openings
Waste covers cuts, breakages and a few rejects. Ten percent suits most straight walls. Use 5% to 7% only for a simple straight wall with few cuts, and 12% to 15% where there are many corners, steps or openings. Ordering the exact count with no waste allowance is how a job stalls one course short of the top.
Mortar is estimated from the QUIKRETE Mortar Mix data sheet: one 80 lb bag of premix lays up to 13 standard blocks at 3/8 in joints. Sakrete’s data sheet lists 12 blocks per 80 lb bag, so treat the bag count as a planning figure and round up: joint thickness, how fully the frogs and cores are bedded, and dropped mortar all move it a little. Half blocks lay at twice the rate per bag, 26, because each one takes half the mortar of a standard block. Grout for filled cores, rebar and wall ties are separate materials and are not counted here.
Mistakes that change the order
Counting with the actual block size, 7-5/8 in, instead of the nominal size with its joint overstates the count, because each block is credited with less face area than it really covers on the wall. Forgetting to deduct a large door or window opening overstates it the other way. And a wall built with standard blocks still needs half blocks at corners and ends: order a share of halves, or plan to cut them, instead of discovering it on the first course.
For a structural retaining wall built from interlocking blocks rather than standard masonry units, use our Retaining Wall Calculator instead, because block sizes and gravel backfill change the maths.
Frequently asked questions
How many concrete blocks are in a square foot?
1.125 standard blocks per square foot of wall. A standard 8 × 8 × 16 in block lays on an 8 × 16 in module once the 3/8 in mortar joint is included, a face of 128 sq in, and 144 ÷ 128 = 1.125. Half blocks (8 × 8 × 8 in) lay at 2.25 per square foot.
How many blocks do I need for a 10 ft by 8 ft wall?
90 blocks before waste, and 99 to order with 10% waste included, in standard 8 × 8 × 16 in blocks. The wall is 80 sq ft, and 80 × 1.125 = 90. Mortar is 8 bags of 80 lb premix at the QUIKRETE rate of 13 blocks per bag.
How many blocks does a bag of mortar lay?
Up to 13 standard 8 × 8 × 16 in blocks per 80 lb bag of premix mortar, per the QUIKRETE Mortar Mix data sheet; Sakrete lists 12 per 80 lb bag. That is about 8 bags per 100 blocks. Half blocks lay at about 26 per bag.
Is a cinder block the same as a concrete block?
Yes. Cinder block is the everyday name for the same concrete masonry unit (CMU) this calculator counts. Older blocks were made with cinder aggregate; modern blocks are cast from concrete, but the sizes and the counting method are unchanged.
Related calculators
- Brick Calculator
- Concrete Calculator
- Concrete Cost Calculator
- Retaining Wall Calculator
- Square Footage Calculator
- Cubic Yard Calculator
Sources
Blocks per square foot = 144 ÷ (face length in inches × face height in inches) on the nominal module, which includes a 3/8 in mortar joint: standard and 4 in and 12 in widths 144 ÷ (16 × 8) = 1.125, half block 144 ÷ (8 × 8) = 2.25. Mortar coverage follows the manufacturers’ data sheets: the QUIKRETE Mortar Mix (No. 1102) data sheet states an 80 lb bag lays up to 13 standard 8 × 8 × 16 in blocks, and Sakrete’s Type S data sheet lists 12 per 80 lb bag; rates for the other sizes are scaled by face area from the standard block. Waste bands of 5% to 7% for simple walls, 10% typical and 12% to 15% for complex work follow published trade guidance.
Changelog
- 16 November 2026: calculator published.
Cite this page
APA: Wolveyes. (2026, November 16). Concrete Block Calculator. Wolveyes. https://wolveyes.pk/calculators/concrete-block-calculator/
MLA: “Concrete Block Calculator.” Wolveyes, 16 Nov. 2026, https://wolveyes.pk/calculators/concrete-block-calculator/
<iframe src="https://wolveyes.pk/calculators/concrete-block-calculator/" width="100%" height="600" style="border:1px solid #E5E0D5;border-radius:8px;" title="Concrete Block Calculator by Wolveyes"></iframe>
<p><a href="https://wolveyes.pk/calculators/concrete-block-calculator/">Concrete Block Calculator by Wolveyes</a></p>