How to Clean a Dishwasher

Home › Guides › How to Clean a Dishwasher

Cleaning a dishwasher means rinsing the filter, clearing the spray arms, wiping the door seal and running two hot empty cycles: one with a cup of white vinegar on the top rack, then one with a cup of bicarbonate of soda on the floor of the tub. The whole job needs nothing more than white vinegar, bicarbonate of soda, hot water and an old toothbrush, and it takes about half an hour of hands-on time plus the two cycles. Rinse the filter weekly and deep clean once a month, and the machine stops smelling, drains properly and washes dishes the way it should.

How do you know your dishwasher needs cleaning?

A musty or rotting-food smell when you open the door is the first sign, and it almost always traces back to a neglected filter. Dishes that come out with grit or a cloudy film, glasses with white spots, water left in the bottom of the tub after a cycle and a machine that takes longer than usual to drain all point the same way. Limescale is a bigger problem in hard water areas, where mineral deposits build up on the spray arms and the heating element. Any one of these signs means it is time for a clean, even if the outside of the machine still looks bright.

What you need

  • White vinegar, about 250ml or one cup, for the first hot cycle.
  • Bicarbonate of soda, about one cup, for the second hot cycle.
  • Hot soapy water, a cloth and an old toothbrush, for the filter and the door seal.
  • A pin or toothpick, for poking debris out of the spray arm nozzles.
  • Rubber gloves, if you would rather not handle the filter with bare hands.

Read the manual first. Some manufacturers warn against vinegar on certain seals or finishes, and some machines have a self-cleaning filter that works differently. If the manual says not to use vinegar on your model, use a dishwasher cleaner made for the job instead and follow the filter steps below.

How to clean a dishwasher step by step

  1. Empty the machine and take the racks out. Remove everything, including the bottom rack, the top rack and the cutlery basket, so you can reach the filter and the spray arms.
  2. Clean the filter. The filter sits in a well at the bottom of the tub, below the bottom spray arm. Twist and lift it out, then rinse it under hot running water and scrub the mesh with an old toothbrush. For a heavily soiled filter, soak it in hot soapy water with a splash of white vinegar for 10 to 20 minutes, then scrub it again. Wipe the empty sump area with a damp cloth before you put the filter back.
  3. Clear the spray arms. Lift the spray arms out if your model allows it, or clean them in place. Use a pin or toothpick to poke food and limescale out of the small nozzles, then rinse the arms under hot water. Blocked nozzles stop water reaching the dishes, so this step matters more than it looks.
  4. Wipe the door seal and the edges. Wipe the rubber seal around the door with a cloth dampened in warm soapy water, and clean the bottom edge of the door where grime collects. For stubborn build-up, use a cloth with white vinegar.
  5. Run the vinegar cycle. Put a dishwasher-safe bowl with about 250ml of white vinegar on the top rack of the empty machine and run a hot cycle with no detergent and no dishes. The hot water carries the vinegar through the pump, hoses and internal surfaces, dissolving grease and limescale.
  6. Run the bicarbonate of soda cycle. Once the vinegar cycle has finished, sprinkle a cup of bicarbonate of soda across the bottom of the tub and run a short hot cycle. The bicarbonate neutralises any remaining acidity and deodorises the machine, so the vinegar smell is gone when the cycle ends.
  7. Put the racks back and wipe the outside. Slide the dry racks back in, then wipe the door and the control panel with a damp cloth. Run a normal cycle with dishes and check that the smell is gone and the water drains fully.

Scrape plates before you load them from now on. The filter only has to catch what you leave on the plates, so a quick scrape keeps it clean for far longer. A dishwasher-safe bowl of vinegar on the top rack once a month keeps limescale down between deep cleans.

How often should you clean a dishwasher?

Rinse the filter under a hot tap once a week if you run the dishwasher daily, and give it a thorough clean with a brush and hot soapy water once a month. Do the full deep clean, both hot cycles included, once a month as well. In a hard water area, or a household that runs the machine every day, the monthly rhythm matters more: limescale builds up faster and the filter clogs sooner. A quick wipe of the door seal each week keeps smells from starting in the first place.

What not to do when cleaning a dishwasher

Never mix bleach with vinegar: the two together make chlorine gas, which is harmful to breathe. Do not pour vinegar and bicarbonate of soda into the machine at the same time, since they cancel each other out; run them as two separate cycles, vinegar first and bicarbonate second. Do not use abrasive pads or steel wool on the tub or the racks, since scratches give grime somewhere to grip. Do not use washing-up liquid in the machine, since it foams up and can flood the kitchen floor. Do not block the spray arms with tall items, since a blocked arm leaves the dishes on one side dirty.

How much does it cost to clean a dishwasher?

The cleaning itself costs pennies: a cup of white vinegar and a cup of bicarbonate of soda are the whole bill, and both are already in most kitchens. The cost that matters is the energy the machine uses while it washes, which you can work out with our Dishwasher Cost Calculator: enter the kWh per cycle from your dishwasher label and the Ofgem rate of 26.32p per kWh. A typical cycle uses 0.76 kWh, which costs about 20p. A clean machine also washes better, so dishes stop needing a second run.

Frequently asked questions

How do I clean a dishwasher with vinegar and bicarbonate of soda?

Put a bowl with about 250ml of white vinegar on the top rack of the empty machine and run a hot cycle with no detergent. Then sprinkle a cup of bicarbonate of soda across the bottom of the tub and run a short hot cycle. Run them as two separate cycles, vinegar first.

How often should I clean my dishwasher?

Rinse the filter under a hot tap once a week if you run the dishwasher daily, and deep clean it once a month, including the filter, the spray arms and the two hot cycles. Wipe the door seal weekly to keep smells away.

Why does my dishwasher smell?

A neglected filter is the most common cause: food debris, grease and biofilm trapped in the filter at the base of the tub. Rinse the filter weekly and deep clean monthly, and the smell usually clears within one or two cycles.

Where is the dishwasher filter?

In a well at the bottom of the tub, below the bottom spray arm. Pull the bottom rack out to reach it. On most UK dishwashers it is a cylindrical unit with a twist-lock mechanism: twist and lift to remove it.

Sources

The weekly filter rinse and monthly deep clean rhythm, the vinegar bowl on the top rack and the bicarbonate of soda on the tub floor follow UK dishwasher cleaning guides from HomeServe and HomeTree. The filter location below the bottom spray arm, the twist-lock removal, the toothbrush scrub and the 10 to 20 minute vinegar soak follow a UK appliance repair guide. The spray arm cleaning with a pin or toothpick and the 250ml vinegar figure follow a UK deep cleaning guide. The warning never to mix bleach with vinegar follows standard cleaning safety guidance. The 0.76 kWh per cycle and 20p per cycle figures follow the Wolveyes Dishwasher Cost Calculator. The 26.32p per kWh rate is the Ofgem Great Britain average Direct Debit electricity rate under the price cap for 1 October to 31 December 2026.

Changelog

  • 11 November 2026: guide published.

Leave a Comment