Furnace Size Calculator

Home › Calculators › Furnace Size Calculator

Home area, climate zone, insulation and ceiling height to the furnace output in BTU per hour your home needs.

BTU/hHeated area: –

A 2,000 sq ft home in a moderate climate with average insulation and 8 ft ceilings needs a furnace output of 90,000 BTU per hour. The maths is 2,000 × 45 BTU per square foot = 90,000 BTU per hour. At 80% AFUE, the input rating on the nameplate needs to be 90,000 ÷ 0.80 = 112,500 BTU per hour. If you want the number for your own home, the calculator above gives it from area, climate zone, insulation, ceiling height and AFUE.

How the BTU per square foot rule works

Published furnace sizing guides agree on a range of 30 to 60 BTU per square foot of heated area, with colder climates at the top of the range. This calculator uses one factor per zone so the result is repeatable: mild 35, moderate 45, cold 50 and severe 60 BTU per square foot. Multiply the factor by the heated area, then adjust for insulation and ceiling height. The result is an estimate for a typical home, not a room-by-room heat loss calculation.

Climate zoneBTU per sq ftExample regions
Mild35Florida, Gulf Coast, Southern California
Moderate45Mid-Atlantic, Pacific Northwest, parts of the Midwest
Cold50Northern states, mountain regions
Severe60Alaska, northern Minnesota

Worked example: a 2,000 sq ft home

Heated area is 2,000 sq ft and the climate factor for a moderate zone is 45 BTU per square foot, so the base figure is 2,000 × 45 = 90,000 BTU per hour. Insulation is average, so the insulation factor is 1.0 and nothing changes. The ceilings are the standard 8 ft, so the height factor is 8 ÷ 8 = 1.0 and nothing changes. Output is 90,000 BTU per hour, which is 26.4 kW. At 80% AFUE, the input rating is 90,000 ÷ 0.80 = 112,500 BTU per hour, which is the figure to compare with the nameplate rating.

Output rating versus input rating and AFUE

Furnace output is the heat the home receives. Furnace input is the fuel energy the furnace consumes, and AFUE is the share of that input that becomes useful heat. A 90,000 BTU per hour output needs a larger input rating as efficiency falls, because more fuel energy is lost up the flue. Divide output by AFUE as a decimal to get the input rating.

AFUEInput rating for 90,000 BTU/h output
80%112,500 BTU/h
90%100,000 BTU/h
96%93,750 BTU/h

Furnace output by home size at a moderate climate

Heated areaOutput at 45 BTU per sq ft
1,000 sq ft45,000 BTU/h
1,500 sq ft67,500 BTU/h
2,000 sq ft90,000 BTU/h
2,500 sq ft112,500 BTU/h
3,000 sq ft135,000 BTU/h

Insulation, ceiling height and oversizing

Well-insulated homes lose less heat, so this calculator uses a factor of 0.9 for them, 1.0 for average insulation and 1.2 for poorly insulated or drafty homes, which sits inside the 10 to 20 percent uplift published for poor insulation. Ceilings above 8 ft hold more air, so watts scale by ceiling height divided by 8: a home needing 90,000 BTU per hour at 8 ft needs 112,500 BTU per hour at 10 ft. An oversized furnace is not a safe margin: it heats the home in short bursts, cycles on and off, and leaves rooms uneven, while an undersized one runs without pause on cold days and still falls short. For a home with an unusual layout, large windows or planned energy upgrades, a professional Manual J load calculation, the method published by the Air Conditioning Contractors of America, gives a more precise number than any square-foot rule, and the US Department of Energy warns against sizing from floor area alone.

For the cost of running the heating once you know the size, use our Heating Cost Calculator. For a single room rather than a whole home, use our Space Heater Size Calculator.

Frequently asked questions

What size furnace do I need for a 1,500 sq ft home?

At a moderate climate with average insulation and 8 ft ceilings, 1,500 × 45 = 67,500 BTU per hour of output. At 80% AFUE the input rating is 67,500 ÷ 0.80 = 84,375 BTU per hour. A mild climate needs less and a cold climate needs more, so run your own zone through the calculator.

What is the difference between furnace output and input BTU?

Output is the heat delivered to the home. Input is the fuel energy consumed. Divide output by AFUE as a decimal to get input: a 90,000 BTU per hour output needs a 112,500 BTU per hour input rating at 80% AFUE, and 93,750 at 96% AFUE.

Is a bigger furnace better?

No. An oversized furnace short cycles, heating in bursts that leave rooms uneven and wear the unit, while an undersized furnace runs without pause on cold days. Aim near the calculated output, and confirm with a Manual J calculation before buying.

Does ceiling height change the furnace size?

Yes. The rule assumes 8 ft ceilings, so scale by ceiling height divided by 8. A 10 ft ceiling raises the requirement by a quarter: a home needing 90,000 BTU per hour at 8 ft needs 112,500 BTU per hour at 10 ft.

Sources

The 30 to 60 BTU per square foot range, the zone factors of 35, 45, 50 and 60, the 10 to 20 percent poor-insulation uplift and the output divided by AFUE input rule follow published furnace sizing guides that agree on these figures. The Manual J note follows the Air Conditioning Contractors of America method as described by those guides, with the US Department of Energy warning against sizing from floor area alone. The watt conversion uses 1 kW = 3,412 BTU per hour.

Changelog

  • 2 November 2026: calculator published.

Cite this page

APA: Wolveyes. (2026, November 2). Furnace Size Calculator. Wolveyes. https://wolveyes.pk/calculators/furnace-size-calculator/

MLA: “Furnace Size Calculator.” Wolveyes, 2 Nov. 2026, https://wolveyes.pk/calculators/furnace-size-calculator/

<iframe src="https://wolveyes.pk/calculators/furnace-size-calculator/" width="100%" height="600" style="border:1px solid #E5E0D5;border-radius:8px;" title="Furnace Size Calculator by Wolveyes"></iframe>
<p><a href="https://wolveyes.pk/calculators/furnace-size-calculator/">Furnace Size Calculator by Wolveyes</a></p>