Room size, ceiling height and insulation to the watts your space heater needs, by the 10 watts per square foot rule.
A 12 ft by 15 ft bedroom with average insulation and an 8 ft ceiling needs a 1,800 W heater. The floor area is 12 × 15 = 180 sq ft, and 180 × 10 watts per square foot = 1,800 W, which is 6,142 BTU per hour. The nearest standard size above that is 2,000 W. If you want the number for your own room, the calculator above gives it from length, width, ceiling height and insulation.
The 10 watts per square foot rule
The standard rule for electric space heaters is 10 watts of heating power for every square foot of floor area, for a room with average insulation and an 8 ft ceiling. Well-insulated rooms need less, about 8 watts per square foot, and poorly insulated or drafty rooms need more, about 12 watts per square foot. In BTU terms, one watt equals about 3.412 BTU per hour, so a 1,500 W heater delivers about 5,118 BTU per hour. The rule sizes the heater to hold a comfortable temperature, not to heat a room from cold in minutes.
Watts needed by room size and insulation
| Room area | Well insulated (8 W per sq ft) | Average (10 W per sq ft) | Poorly insulated (12 W per sq ft) |
|---|---|---|---|
| 100 sq ft | 800 W | 1,000 W | 1,200 W |
| 150 sq ft | 1,200 W | 1,500 W | 1,800 W |
| 200 sq ft | 1,600 W | 2,000 W | 2,400 W |
| 300 sq ft | 2,400 W | 3,000 W | 3,600 W |
| 400 sq ft | 3,200 W | 4,000 W | 4,800 W |
Worked example: a 12 ft by 15 ft bedroom
Floor area is 12 × 15 = 180 sq ft. At average insulation, watts needed are 180 × 10 = 1,800 W, and the ceiling is the standard 8 ft, so no height adjustment applies. Heat output is 1,800 × 3.412 = 6,141.6, rounded to 6,142 BTU per hour. The nearest standard heater size above 1,800 W is 2,000 W. In portable 1,500 W units, that room needs two units on separate circuits, because one 1,500 W unit covers only 150 sq ft at the average rate.
Ceiling height and the 1,500 W limit
The 10-watt rule assumes an 8 ft ceiling. A room with a 10 ft ceiling holds a quarter more air than the same floor area at 8 ft, so the calculator scales watts by ceiling height divided by 8: the 12 ft by 15 ft room above at 10 ft needs 1,800 × 10 ÷ 8 = 2,250 W. Most portable heaters top out at 1,500 W, because a standard 120 V, 15 amp household circuit delivers 1,800 W at most. For a room needing more than 1,500 W, the options are two portable units on separate circuits, or a higher-wattage 240 V hardwired heater fitted on its own circuit.
Heater types and safe placement
Convection heaters, including oil-filled radiators, suit whole-room heating because they warm the air steadily. Radiant heaters suit spot heating, warming people and objects in front of them rather than the whole room. Whichever type you pick, keep it at least three feet from curtains, furniture, bedding and paper, never leave it running unattended, and plug it straight into a wall outlet rather than an extension cord or power strip.
Mistakes that leave a room cold
Sizing from the box room claim instead of measuring is the first mistake, because box claims assume ideal insulation. Ignoring ceiling height is the second, because volume, not floor area alone, is what the heater warms. Buying one 1,500 W unit for a 300 sq ft room is the third: at the average rate that room needs 3,000 W, so a single portable unit runs without pause and still falls short. A little headroom above the calculated watts is worth having, because it lets the heater cycle on its thermostat instead of running flat out.
Once you know the watts, the running cost follows from hours and your electricity rate: our guide How Much Does It Cost to Run a Space Heater? works it out at the current average rate. For whole-home heating costs, use our Heating Cost Calculator.
Frequently asked questions
What size space heater do I need for a 150 sq ft room?
A 1,500 W heater at the average rate of 10 watts per square foot: 150 × 10 = 1,500 W. A well-insulated 150 sq ft room needs 1,200 W, and a poorly insulated one needs 1,800 W, which means a 2,000 W unit or two portables.
How many square feet will a 1,500 W heater heat?
About 150 sq ft at average insulation and an 8 ft ceiling. The same heater covers closer to 180 sq ft in a well-insulated room, and 125 sq ft or less in a drafty room.
Why do portable heaters stop at 1,500 W?
A standard 120 V, 15 amp household circuit delivers 1,800 W at most, so 1,500 W is the practical ceiling for a plug-in portable heater. Larger rooms need two units on separate circuits or a 240 V hardwired heater.
Does a higher ceiling change the heater size?
Yes. The rule assumes an 8 ft ceiling, so scale watts by ceiling height divided by 8. A 10 ft ceiling raises the requirement by a quarter: a room needing 1,800 W at 8 ft needs 2,250 W at 10 ft.
Sources
The 10 watts per square foot rule, the 8-watt well-insulated and 12-watt poorly insulated adjustments, and the 1,500 W portable ceiling follow published space heater sizing guides that agree on these figures. The watt-to-BTU conversion uses 1 watt = 3.412 BTU per hour. The three-foot clearance rule for flammable materials follows standard portable heater safety guidance.
Changelog
- 31 October 2026: calculator published.
Cite this page
APA: Wolveyes. (2026, October 31). Space Heater Size Calculator. Wolveyes. https://wolveyes.pk/calculators/space-heater-size-calculator/
MLA: “Space Heater Size Calculator.” Wolveyes, 31 Oct. 2026, https://wolveyes.pk/calculators/space-heater-size-calculator/
<iframe src="https://wolveyes.pk/calculators/space-heater-size-calculator/" width="100%" height="600" style="border:1px solid #E5E0D5;border-radius:8px;" title="Space Heater Size Calculator by Wolveyes"></iframe>
<p><a href="https://wolveyes.pk/calculators/space-heater-size-calculator/">Space Heater Size Calculator by Wolveyes</a></p>