Brick Calculator

Home › Calculators › Brick Calculator

Wall length and height to a brick count, mortar bags and course count, for four common brick sizes.

Length: –Height: –

A 20 ft by 8 ft single-skin wall in modular brick needs 1,207 bricks once 10% waste is included, plus 41 bags of mortar. The method is short: net wall area times bricks per square foot for your brick size, doubled for a double-skin wall, plus a waste allowance for cuts and breakages. If you want the count for your own wall, the calculator above does it in one step.

How the brick count works

Start with the wall area: length times height, minus the area of doors and windows. Then multiply by the bricks per square foot for the brick you are laying. That rate comes from the face area of one brick plus its mortar joint, not from the bare brick size. A standard 3/8 in (10 mm) joint is assumed throughout, because leaving the joint out is the most common reason a brick count comes up short.

The formula is: bricks = (length × height − openings) × bricks per square foot × skins × (1 + waste ÷ 100). Skins is 1 for a single-skin wall and 2 for a double-skin wall. The calculator rounds the final count up, so a part brick is never ordered as a fraction.

Bricks per square foot by brick size

Find your brick in the left column and read across. The per-square-metre column is the same rate converted, and the UK metric row is the familiar trade figure of about 60 bricks per square metre for a single skin.

Brick sizeFace size with jointBricks per sq ftBricks per m²
Modular8 × 2-5/8 in6.8673.8
Standard8-3/8 × 2-5/8 in6.5570.5
Queen8 × 3-1/8 in5.7662.0
UK metric225 × 75 mm5.5159.26

Worked example: a 20 ft by 8 ft garden wall

Take a single-skin garden wall, 20 ft long and 8 ft high, in modular brick, with a standard door opening of 21 sq ft to deduct. Gross area is 20 × 8 = 160 sq ft. Net area is 160 − 21 = 139 sq ft. Bricks before waste are 139 × 6.86 = 954 bricks (rounded up). With 10% waste, the order is 954 × 1.10 = 1,049 bricks, and mortar is 1,049 ÷ 30 = 35 bags of 80 lb mix, rounded up. Without the door opening, the same wall needs 1,207 bricks and 41 bags.

Waste, mortar and courses

Waste covers cuts, breakages and a few rejects. Ten percent suits most straight walls. Use 5% to 7% only for a simple straight wall with few cuts, and 12% to 15% where there are many corners, curves or openings. Ordering the exact count with no waste allowance is how a job stalls one course short of the top.

Mortar is estimated at one 80 lb (36 kg) bag of Type S mix per 30 bricks laid. Treat it as a planning figure: joint thickness, brick absorption and how much mortar is dropped all move it a little. Courses are the wall height divided by one brick height plus its joint, rounded up, so an 8 ft wall in modular brick is 37 courses.

Mistakes that change the order

Using the bare brick size instead of the size plus joint overstates the count, because each brick is credited with less face area than it really covers. Forgetting to deduct doors and windows overstates it the other way on large openings. And bricks vary a little from batch to batch, so buy the whole job in one batch where you can: a second batch can differ in shade even when the size matches.

For a structural retaining wall built from interlocking blocks rather than bricks, use our Retaining Wall Calculator instead, because block sizes and gravel backfill change the maths.

Frequently asked questions

How many bricks are in a square metre?

About 60 standard UK bricks for a single-skin wall, or about 120 for a double-skin wall, based on 10 mm mortar joints and 10% waste excluded. Add waste on top of that figure.

How many bricks do I need for a 20 ft by 8 ft wall?

In modular brick, 1,098 bricks before waste and 1,207 bricks with 10% waste for a single-skin wall with no openings. Deduct 21 sq ft for a standard door and the order falls to 1,049 bricks.

Do I double the count for a double-skin wall?

Yes. A double-skin wall is two leaves of brickwork, so it needs twice as many bricks as a single-skin wall of the same area, and twice the mortar.

How many mortar bags do I need per 1,000 bricks?

About 34 bags of 80 lb (36 kg) Type S mix, at the planning rate of one bag per 30 bricks. Round up, and allow a little extra on walls with many cuts.

Related calculators

Sources

Bricks per square foot = 144 ÷ (face length in inches × face height in inches), with a 3/8 in (10 mm) mortar joint included: modular 144 ÷ (8 × 2.625) = 6.86, standard 144 ÷ (8.375 × 2.625) = 6.55, queen 144 ÷ (8 × 3.125) = 5.76, UK metric 1 ÷ (0.225 × 0.075) = 59.26 per m². Mortar at one 80 lb bag per 30 bricks is a planning figure used by published brick calculators. Waste bands of 5% to 7% for simple walls, 10% typical and 12% to 15% for complex work follow published trade guidance.

Changelog

  • 30 October 2026: calculator published.

Cite this page

APA: Wolveyes. (2026, October 30). Brick Calculator. Wolveyes. https://wolveyes.pk/calculators/brick-calculator/

MLA: “Brick Calculator.” Wolveyes, 30 Oct. 2026, https://wolveyes.pk/calculators/brick-calculator/

<iframe src="https://wolveyes.pk/calculators/brick-calculator/" width="100%" height="600" style="border:1px solid #E5E0D5;border-radius:8px;" title="Brick Calculator by Wolveyes"></iframe>
<p><a href="https://wolveyes.pk/calculators/brick-calculator/">Brick Calculator by Wolveyes</a></p>